https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/191038/annotation-group-levels-in-profile-drawing-modelThe elements in the drawing model coming from annotation group (profile frame and table) do not conform to the specs defined in the library. Lines weight and style are set to 0 while in the style library they are defined differently. The case is onlyen-USTelligent Community 12https://communities.bentley.com/thread/564305?ContentTypeID=1Wed, 15 Jan 2020 12:45:24 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:f7d34030-e168-4872-bc30-79b2f5ed7b29Benedykt Bilkiewicz<p>The other geometry file which I produced profile drawings from and sheet models, also in separate file, gave proper results. It must be intermittent and somehow related to the geometry file itself or seed file from which the drawing and sheet model is created.</p> <p>BTW is it normal that creation and annotation of 30 drawings and sheet models take one hour to complete and 30 GB of ram? Granted the alignment is 60km long but still the performance is so poor</p><div style="clear:both;"></div>https://communities.bentley.com/thread/564017?ContentTypeID=1Tue, 14 Jan 2020 10:15:07 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:87c0e90a-73e4-4d77-bb13-775836184b50Simon Pegg<p>Hi Benedykt</p> <p>I think I have replicated this issue. I think it is a defect. I will see if there is any workaround.</p> <p></p> <p>Simon Pegg</p> <p>Bentley Civil Support</p><div style="clear:both;"></div>