[ORD 2019R2] Superelevation "Reattach Corridor" Analog

RE: [ORD 2019R2] Superelevation "Reattach Corridor" Analog

Marc Bachand — Wed, 29 Jan 2020 13:20:34 GMT

Robert,

When using this tool you do not pick the superelevation object, you pick the old centerline and then replace it with the new.

RE: [ORD 2019R2] Superelevation "Reattach Corridor" Analog

Robert Huston — Fri, 24 Jan 2020 19:28:34 GMT

I tried this and the response was that the superelevation section was not valid for the tool. Good to keep in mind though. Thanks again for the feedback!

RE: [ORD 2019R2] Superelevation "Reattach Corridor" Analog

Norman Mier — Fri, 24 Jan 2020 17:34:58 GMT

It would be nice to have a support tool that would allow the reassignment/reattachment/reruled of any smart element from one smart element to a different smart element. So that a smart element that is a referenced as a rule, that may have been corrupt or otherwise made unusable but is still selectable, can be replaced globally with in a DGN with a different smart element.

RE: [ORD 2019R2] Superelevation "Reattach Corridor" Analog

Robert Huston — Tue, 21 Jan 2020 13:30:23 GMT

Thanks Marc! I will update my tracker.

RE: [ORD 2019R2] Superelevation "Reattach Corridor" Analog

Robert Huston — Tue, 21 Jan 2020 13:30:07 GMT

I will definitely take a look at this. Thanks for the heads up!

RE: [ORD 2019R2] Superelevation "Reattach Corridor" Analog

Marc Bachand — Tue, 21 Jan 2020 11:59:34 GMT

Does the superelevation have association with any horizontal alignment? If so, and you want to swap that to a new alignment the key in "geometry element replace" will do this....among other things. So user beware. This key in will replace all referencing geometry from one element to another.

RE: [ORD 2019R2] Superelevation "Reattach Corridor" Analog

Marc Blancher — Tue, 21 Jan 2020 10:00:26 GMT

I filed the Enhancement 1074730:reattach superelevation to a different alignment

RE: [ORD 2019R2] Superelevation "Reattach Corridor" Analog

Robert Huston — Mon, 20 Jan 2020 17:33:46 GMT

That would be great! Its not the end of the world to have to recreate the superelevation section, especially we use CSVs generated from Excel spreadsheets that went through our QC process, but such a tool would definitely save time in this scenario, and shouldn't be hard to implement since Reattach Corridor pretty much functions the exact same way.

RE: [ORD 2019R2] Superelevation "Reattach Corridor" Analog

Marc Blancher — Mon, 20 Jan 2020 15:31:28 GMT

Hi Robert, I'm not aware of such a capability with ORD, do you want to file an enhancement request?