How to remove stenciled pavement marking

RE: How to remove stenciled pavement marking

Mark Marnell — Thu, 30 Jan 2020 16:07:00 GMT

Deleting the model is an extreme method - you could (as Louis says) just detach (or turn off the display of) the referenced model. This would be a better method if you needed to see the stencil later.

RE: How to remove stenciled pavement marking

wildan hero — Thu, 30 Jan 2020 16:03:13 GMT

Not yet. Thanks a lot. It can be removed that way

RE: How to remove stenciled pavement marking

Mark Marnell — Mon, 20 Jan 2020 08:13:27 GMT

Have you tried deleting the 'Stencing model' which is referenced into your bridge model?

RE: How to remove stenciled pavement marking

Louis van Amerongen — Sat, 18 Jan 2020 12:02:40 GMT

Hi Wildan,

The way to remove a stenciled marking depends on the method how you placed it. Have you tried to simply delete the elements with the Delete tool? If so, can you check if the marking is attached as a reference. I understand you detached the reference in the Reference Manager. Can you check if you done that with the right View activated.

If you use multiple views with multiple (2D, 3D, profile, etc) models, it is important to check which view is active when detach a reference.

Regards,

Louis