Cannot edit pipe slope nor invert 2020 release 1

This can reproduced in any workspace in which I have tried, including the Bentley sample workspace. This report has been duplicated in SR Number: 7001047309

• Place two waste water nodes (manholes for example)
• Place a wastewater conduit between them
• Select the conduit
  • You cannot edit the slope nor elevation using manipulators
  • You cannot edit elevations in properties
• Place two storm nodes (catch basins for example)
• place a storm conduit between them
• Select the conduit
  • Ditto - you cannot edit slopes nor elevations

I cannot resist a bit of commentary: If you want adoption of these tools, you really need to quit breaking things which have been working for years.

On a less critical note: The effect of this bug renders drainage and sanitary workflows virtually useless in this release.

For anyone else facing the same dilemma as myself, the following is the only workaround I have found:

• Select the conduit in question
• Open profile for the conduit
• You can edit the pipe inverts in the profile
• BUT...you must use Civil Accudraw if you need precise input.

Not only does this workaround take 10 times as long, but I must move Civil Accudraw training effort tot he front of the line when I would prefer to save it as an advanced topic for some of our designers.