https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/195053/exception-of-type-system-outofmemoryexception-was-thrownHas anyone received the above error message while working in Microstation/Geopak. It occurs a lot when working with several aerials (from local area to 20 mile corridor study) (.sid files or .hmrs) or as I as have been informed having several other filesen-USTelligent Community 12https://communities.bentley.com/thread/580093?ContentTypeID=1Mon, 13 Apr 2020 17:05:49 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:fd05f95b-0b42-4af6-b458-f6dd730efcafMike DeVore<p>Hi Jacob,</p> <p>Adding the MS_MEMORY_FREELIMIT to the config file worked for about a couple of days. However I begun to experience the crashes</p> <p>again at least twice a day. It would appear the only logical step would be to go to 64-bit Microstation but since one of my clients is a DOT they will have to make that call. Unless you know of something else to try.</p> <p>Thanks for the help&nbsp;</p><div style="clear:both;"></div>https://communities.bentley.com/thread/578954?ContentTypeID=1Tue, 07 Apr 2020 14:03:44 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:cf819a7d-e065-49cb-a9b3-a4f7565f169dJacob Dean<p>Hi Mike,</p> <p>Try checking out&nbsp;the link below, and see if it pertains to you.</p> <p><a href="/products/road___site_design/f/geopak-inroads-mx-openroads-forum/125210/openroads-out-of-memory-crashes">https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/125210/openroads-out-of-memory-crashes</a></p> <p>If it does, you should be able to add a config variable named MS_MEMORY_FREELIMIT, and then you can set a physical and virtual limit, respectively. You can use the following as an example: 100,999. You might need to close out of the program and reopen it for the changes to take affect, but hopefully this helps!</p> <p>Regards,</p> <p>Jacob</p><div style="clear:both;"></div>