I'm currently using Power InRoads V8i SS4. In the past I've used the process in the link below to convert a DTM to a TTM for use in my Trimble survey grade GPS. I've been unable to recreate this process with a new computer. Any help with how to create convert a dtm to a ttm is appreciated.
I also have Open Roads Designer on my computer if that is my only option.
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/9335/exporting-to-trimble-format
Thanks
Paul Backhaus
See attached video and follow the workflow. Let me know if you get the same results.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at:
http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Marcus
I updated to SS10 and Upload Trimble does not show up as an Add-In.
Looks like I don't have the option to add-in Upload Trimble in SS4. I'll make the upgrade to SS10
Paul
I see the tool in Power InRoads SS10. Do you not see it in SS4? It's under Tool>Application Add in>Upload trimble, then went to File>Translators
In SS2 there was a tool called Trimble Link that allowed me to convert a DTM into a TTM. A TTM is a file that can be used in a Trimble data collector . Is there a similar tool that would allow me to do the same conversion?
I found someone who had a similar issue a few years back.
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/90154/upload-trimble-add-in-not-available-in-ss3/257209#257209