https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/196968/draping-surfaces-using-stencilcan we use stecil command in openroads designer to drape multiple 2D surfaces onto terrain (or any 3d surface) simultaneously? Right now i have to use this commande for ONE 2D SURFACE at a time. I have multiple such 2D surfaces in my model hence it isen-USTelligent Community 12https://communities.bentley.com/thread/585762?ContentTypeID=1Mon, 11 May 2020 08:13:52 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:75d5899b-bd4b-40a9-9b59-89a800152668Tarunkumar RAJGOR<p>Thanks Mark,&nbsp;</p> <p>this helps..</p><div style="clear:both;"></div>https://communities.bentley.com/thread/585751?ContentTypeID=1Mon, 11 May 2020 07:51:14 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:a6484ff8-89db-4100-97e2-114ceb95a179Mark Marnell<p>Make a selection set of the 2D elemetns first, and then drape the selection set. See the following.</p> <p><a href="/products/microstation/w/microstation__wiki/28317/how-to-drape-2d-element-over-a-surface-of-multiple-triangles">https://communities.bentley.com/products/microstation/w/microstation__wiki/28317/how-to-drape-2d-element-over-a-surface-of-multiple-triangles</a></p><div style="clear:both;"></div>