In my corridor, I had a point control that I have since deleted.
The corridor however is still calculating a cross section at that station.
The station is NOT in the Key in station list.
Is there a way to stop my corridor from calculating a cross section at this station?
It may happen be a horizontal or vertical cardinal point that is being calculated to properly adjust for, say, a change in grade. This could be controlled at the Corridor level by the Feature Definition/Design Stage you've selected. You can check this by drilling down to the Properties of the Feature Definition within Project Explorer in your DGN.
Eddie Giese, PEProduction Manager | Senior Roadway EngineerLicensed in FL & PAACEC FDOTConnect Instructor on behalf of FDOT
Patel, Greene & Associates, LLC PowerGEOPAK V8i SS10 (08.11.09.918)OpenRoads Designer 2021 R2 (10.10.21.4)OpenRoads Designer 2020 R3 (10.9.0.91)ProjectWise Explorer CE 10.0.3.453LumenRT CE Update 14 (16.14.60.98)
I verified that the station in question is NOT at a horizontal or vertical cardinal point.
I changed my design stage to one that does not include critical sections at horizontal or vertical cardinal points and the model still calculates a cross section at the station in question.