Combined Scale factor in OpenRoads Designer

Thie is where: 

but I cannot tell what are the different implication of using it and if they all work within Openroads

Thanks JeremieDL,

Yes this is what i want to Know that the Combined Scale factor in Survey Setting is applicable for the whole Project or only for processing the survey adjustments. Like in OpenRoads SS2/SS4 there is Option in Set Project Defaults where the Grid factor option is there which is applicable for the whole project. 

When We are working with UTM Coordinates and creating alignment for the proposed Pipelines or Roads the stationing and profile are Grid but  for staking on ground we have to give the stationing in Ground.

Thanks

Ilyas

You could file a Service Ticket with Bentley Support for a faster answer to your question.

Thanks

Any answer on this?  Did you get it to wrok?

Hi Jermie,

No i checked the combined factor in Survey setting, it is good for the survey processing and adjustments only, the combined factor will not apply to the whole project. I already raised the trouble ticket  on Bentley site.Please see below snapshot.

Regards

Ilyas

Hello, I can provide an update for this enhancement request 1103118.

The dev team says that non survey elements, such as geometry, need to be handled with Custom Coordinate Systems (at the project level) or the Transformation tool (at the element level).

To create Custom Coordinate Systems, you can follow this wiki:

https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/48809/video-creating-custom-geographic-coordinate-systems-in-openroads-designer

And there is this PowerPoint that may be useful: https://communities.bentley.com/products/geospatial/desktop/m/geospatial_desktop_gallery/218386

Hello, I can provide an update for this enhancement request 1103118.

The dev team says that non survey elements, such as geometry, need to be handled with Custom Coordinate Systems (at the project level) or the Transformation tool (at the element level).

To create Custom Coordinate Systems, you can follow this wiki:

https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/48809/video-creating-custom-geographic-coordinate-systems-in-openroads-designer

And there is this PowerPoint that may be useful: https://communities.bentley.com/products/geospatial/desktop/m/geospatial_desktop_gallery/218386