https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/199888/modify-edit-existing-geometryHi What would be the best way to modify or editing a existing horizontal and vertical (complex) geometry. I need to add new lines and arcs to existing geometry (both horizontal and vertical) where i already have created a corridor and civil cell intersectionen-USTelligent Community 12https://communities.bentley.com/thread/597167?ContentTypeID=1Thu, 09 Jul 2020 07:05:31 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:1a4b1602-c413-431f-872f-f6ef6c318719Sigfus Jonsson<p>Thanks Jacob, that was exactly what i was looking for :-)</p><div style="clear:both;"></div>https://communities.bentley.com/thread/596551?ContentTypeID=1Mon, 06 Jul 2020 15:57:24 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:44a2988b-a26a-4901-9c67-0039f372b9ecJacob Dean<p>If you are adding new lines and arcs to existing geometry, I recommend creating your lines/arcs and using the Complex Geometry tools. You can find them in the Horizontal and Vertical sections of the Geometry tab of the OpenRoads Modeling workflow. You can also use the Complex Redefine tool found in the Common Tools section in the same place. Since you will have changed it, you will need to reprocess/update anything that depends on the geometry, like corridors. I added below a link to a potentially helpful LEARNserver course and a similar forum post.</p> <p><a href="https://learn.bentley.com/app/Public/ViewLearningPathWithMasterCourseExpanded?lpId=110831&amp;mcId=103290">https://learn.bentley.com/app/Public/ViewLearningPathWithMasterCourseExpanded?lpId=110831&amp;mcId=103290</a></p> <p><a href="/products/road___site_design/f/geopak-inroads-mx-openroads-forum/196507/adding-new-elements-to-existing-geometry">https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/196507/adding-new-elements-to-existing-geometry</a></p> <p>Regards,</p> <p>Jacob</p><div style="clear:both;"></div>