Hi. Can you please tell me how I can delete a terrain model in OpenRoads Designer. Thank you
how to configure the units?
Santiago Martínez Pardo
Topografía y Oficina Técnica Unidad BIM - Área Técnica
T. 690369021 smpardo@comsa.com www.comsa.com
Is the terrain in a reference file? If not, is the file 'read only'?
View online
You received this notification because you subscribed to the forum. To unsubscribe from only this thread, go here.
Flag this post as spam/abuse.
I am not sure I understand how the graphics can be in the correct coordinates, but the terrain is not.Unless you referenced in the DWG and moved it.
Does the DGN file have a Geographic Coordinate System set?
Configure the units - do you mean in the DGN or the DWG?
DGN - File > Settings > File > Design File Settings > Working Units.The working units would normally be set in the seed file, (DWG - I do not know how to set this.)
Hi. in my dgn file these are the units:
in my dgn file if I have a system of coordinates configured:
in the dwg file that I reference:
and
when I reference the dwg:
the dwg comes out at these coordinates:
change 1000 by 1 and the dwg file if it goes to the correct coordinates. At that moment I graphically select the elements to create the Terrain and without knowing why the terrain is created in the wrong previous coordinates ... thank you!
DWG in millimetres for a terrain model?? That is not normal, right? Civil projects use meters, architects use millimeters!
However, it is good that you have it working now.
Answer Verified By: Mark Marnell
Hi. I have changed the units in the dwg file, I have referenced it and I still have the same problem ... thank you!
Try attaching the DWG reference with the reference setting "True Scale" (the button with "1:1" on it) turned on and see if that helps.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2