Hi. How to calculate the unevenness between 2 different terrain models and obtain a list or a drawing where these values appear? (old isopach) and between a terrain model and a layout or corridor model? Thank you
Do you mean a mesh between the two terrains, and a report on that mesh?
Which version of OpenRoads are you using?
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Hi. I mean a mesh between 2 terrains. What with Power InRoads was called isopach. I would also like to know how I can calculate the unevenness between a Terrain Model and a Corridor Model, that is, between the topography and the road. I use OpenRoads 2020 - Release 2 (10.08.01.33). Thank you
I believe what you may be looking for would be Create Delta Terrain. The following article may be helpful:
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/26440/what-openroads-tool-is-equivalent-to-the-inroads-create-isopach-surface-command
Thank you. I have followed the instructions but the result does not satisfy me:
Is it possible to obtain a list with these slopes referred to an axis and every x meters? in order to have a report ... thank you
You may be able to look into Reports, and reference them to your alignment.I don't have a lot of experience with this, so hopefully someone with more practice will be along at some point.
For the grid annotation, see the PDF I attached to the following post.
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/201359/view-grid-values-of-a-delta-surface
thank you very much Mark. Instead of a mesh of points I have used the axis annotation lines: