• State Suggested Answer
  • Locked Locked
  • Replies 22 replies
  • Answers 3 answers
  • Subscribers 142 subscribers
  • Views 3392 views
  • Users 0 members are here
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

imported survey points don't display like in SS2 & SS4

Isaac Lopez
Offline

I am trying to import survey points and have them show as they used to in SS2. 

when using the text import wizard on ORD I get the points displayed as "Decorations": 

what I need is for the point to show up like in SS2 and SS4 when they come in as actual point example: 

as of right now we are processing the points on SS2 and then switching to ORD but we would like to use only one software if possible

any help would be appreciate it. 

Thanks 

Software: 

OpenRoads Designer Connect Edition 

10.8.1.33

Power InRoads V8i (SELECTseries 2 ) 

08.1107.615

Hardware 

MSI 

32.00 GB RAM 

AMD FX(tm)-8350 EIght-Core Processor, 4000 Mhz, 4 Core(s), 8 Logical Processir(s)

Microsoft windows 10 Pro 

Locale United States 

Base 990FXA GAMING (MS-7893) 

Parents
  • 0 Offline

    Have you set up your point features to display the same as your SS2/SS4? ORD requires quite a bit of setup, and if that isn't right, things will not show the way you might expect.

    MaryB

    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918
    OpenRoads Designer 2021 R2

       

Reply
  • 0 Offline

    Have you set up your point features to display the same as your SS2/SS4? ORD requires quite a bit of setup, and if that isn't right, things will not show the way you might expect.

    MaryB

    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918
    OpenRoads Designer 2021 R2

       

Children
Communities
Support and Services
Training and Learning
Social Media