Annotating Civil Cells in cross sections in OpenRoads Designer Connect Edition

I have a corridor that I use civil cells for driveways and Tee intersections at both ends. I need to cut cross section at centerline of each driveway. Also I like to see my cross slopes at both ends of my corridor where I have my T intersection civil Cells. In SS4 I was able to select the civil cell terrain in my filters but in OpenRoads designer I am not sure how to accomplish this task since you could only pick template points and civil cells only have surface templates. Any help would be much appreciated. Thanks,

Parents
  • OpenRoads uses features not limited to template points. It means that you can use any feature that is in the 3D model. However if you want to annotate between 2 features that are not a segment of a template, you must "create" this segment in the annotation group. You can do so by using "List of segments" and edit the list of segment. You can pick a segment and edit point names to change them and create your own segment.



Reply
  • OpenRoads uses features not limited to template points. It means that you can use any feature that is in the 3D model. However if you want to annotate between 2 features that are not a segment of a template, you must "create" this segment in the annotation group. You can do so by using "List of segments" and edit the list of segment. You can pick a segment and edit point names to change them and create your own segment.



Children