https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/204019/ss2-power-geopak-corridor-transverse-lines-crossingAs part of working on a corridor for stream restorations, I have corridor transverse lines crossing, creating a &#39;bowtie&quot; look. Is there are way to remedy this? It is very diffuclt to create surface and use this surface in cross sections.en-USTelligent Community 12https://communities.bentley.com/thread/612429?ContentTypeID=1Fri, 02 Oct 2020 18:45:31 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:29c574ae-3aaf-400a-b392-580cd64d2743caddcop<p>Secondary alignments?</p> <p>When doing stream work, you may want to push only to a certain width and then grade from there using secondary corridors running off the outer breakline features.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/612420?ContentTypeID=1Fri, 02 Oct 2020 17:29:05 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:eea73b6d-4b95-4cb4-b023-ff75b617e12bRay Thwaits<p>I&#39;ve found that the only way to avoid this with the roadway designer is to increase the curve radii to something greater than the width of the section.&nbsp; If that won&#39;t work, you will have to make edits to the surface after running the corridor.</p><div style="clear:both;"></div>