Pipe snap to node center & 3D conduit cut to node wall

Mark:

Indeed, the pipes do trim; however, the unified length and the construction length will now both be to the center of the object. We calculate our pipe lengths 3D and inside edge to inside edge. Furthermore, imagine that one is connecting from a circular manhole to a boxed inlet. Now, the length is from the CENTER of the manhole to the EDGE of the boxed structure. The software needs to understand unified vs. construction length in the manner it used to but while trimming the conduit on circular objects.

Mark

Is that this enhancement?

I heard somewhere that this was fixed in 10.11?  Is that just a rumor?  (I'm currently using a connection cylinder with a diameter of 0.01 inches.  This works suitably, except the profile shape seems to be the diameter of the connection region (0.01").  3D Slice helps some them.

What do you call it when you resurrect a dead thread?  (the kids have a term for it)

Hi Mark,

Do you know if this is resolved for 10.10? The snapping issue that is (looks like conduit node wall clipping came in 10.09)

Well, while developing 15 km of freeway what gives about 250 manholes, 350 inlets and 7 km of conduit, good monipulation of drainage system is must be. Waiting for the update :)

Close subject.