Folks:
Has anyone been aware of the Intersecting Profile Command not working in ORD 2020R3? We can pick the alignments with associated verticals, but no point appears in the profile where the intersection takes place.
There appears to be some schema changes in this version of the software, and the only thing I can think of which may be causing some issue is that we are currently using the 2020R2 version of the "_Civil Default Standards - Imperial.cfg" file. I am still comparing the different versions of these files to makes sure that R3 will not substantially affect our workflow.
Thanks in advance!
Mark
Mark, I am thinking this may be related to your 20R2 standards file. I tested in the Bentley Imperial workspace as well as a configuration that I have updated to 20R3 and get the intersection point and it appears to remain dynamic.
Steve
www.envisioncad.com
ORD - 10.12.02.04 / 10.10.21.04 / 10.10.01.03 / 10.08.01.33Power GEOPAK / Power InRoads - 08.11.09.918Civil 3D - 2021 / 2022
Steven:
Thank you for answering my call, Steven. I am not sure what was happening before, but we have changed our configuration about a bit in order to be "in compliance" with Bentleys' (unmodified) 2020R3 "_Civil Default Standards - Imperial.cfg" file. The command is working again.
My pleasure Mark, glad to hear you are running again.