While designing the profile, I need to display the following in profile view: -
1) Terrain at 25m LHS and 25m RHS from the Design Centerline.
2) Terrain at Design Centerline raised by 2.1 meters.
3) Profile of a 3D line (For example, centerline of a parallel road).
Hi Dipak,
In order to get the profile at 25m LHS & RHS you can try the "Profile From Surface". The video below will help with same:
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/35110/video-profile-from-surface
In order to get the profile of another alignment, can be achieved using "Project Profile to Element". Below video will help:
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/39099/video-project-profile-to-element
Hope this helps. Do let me know.
Answer Verified By: Dipak