https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/206954/mx-road-cross-section---how-to-display-formation-width-with-dimension-stylesHi, I am trying to generate cross section drawings for Rail Yard with multiple tracks in MX Road. I need to display the dimensions showing the width of formation edge from outer track center, and distance between the track centers in the Cross Secionen-USTelligent Community 12https://communities.bentley.com/thread/623583?ContentTypeID=1Mon, 07 Dec 2020 07:41:41 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:a7550f6e-9f69-4324-9038-77f0af92942eMark Marnell<p>Use DRAW option 846, setting field 7 = -21 That will annotate the distance between adjacent points. To annotate only the points you want, create a cross-section that cuts only the required strings (use 019 to mask the strings).</p><div style="clear:both;"></div>https://communities.bentley.com/thread/623575?ContentTypeID=1Mon, 07 Dec 2020 07:24:32 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:b4c569a5-02ba-4df6-a038-0b1ecacf2c82Dipak<p>Hello Sir,</p> <p>You will require to design a master string at the one of the centers of a track. Offset/Design subsidiary strings to other track centers. Copy those in a separate model and triangulate the model. While generating cross sections, use that triangulation model as an additional surface. The center to center distances shall be annotated in a separate box below. The only difference is that the distances shall be cumulative distances from the Master string.</p><div style="clear:both;"></div>