Currently, I have my existing utility lines in 2d view with a feature definition and plotted them at an assumed depth of 3' below existing ground in profile view and set as active profile. Typically, in SS4 and SS10 this worked in terms of displaying the utility line in my cross-sections views. However, in Openroads it shows my utilities only as a point. I am unable to display the height and width of the utilities. Is there something crucial I am missing or is this process done entirely different.
Does your feature definition have a cross section setting?
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
I don't think so. I only assigned a feature definition in plan view.
I am still learning this myself, but I believe that you can assign settings to profile and cross section aspects of a feature, as well as plan.
Such as, if the feature is crossed in section, display "this cell" or something.
As I said, I'm still learning this, but I seem to recall that's how the other views of a feature are controlled - through the feature definition.
I'm sure that, if I'm way off base, someone will be along soon to tell us both how it's supposed to be done :-)