Openroads: How to Display Existing Utilities in Cross-Sections?

Currently, I have my existing utility lines in 2d view with a feature definition and plotted them at an assumed depth of 3' below existing ground in profile view and set as active profile. Typically, in SS4 and SS10 this worked in terms of displaying the utility line in my cross-sections views. However, in Openroads it shows my utilities only as a point. I am unable to display the height and width of the utilities. Is there something crucial I am missing or is this process done entirely different.

Parents Reply
  • I have found that you can modify the annotation group in the default model of your cross section drawing.  In some cases I have had to switch files and then back to the cross section drawing to see the annotation group and any other options under OpenRoads Standards.  The annotation group is set when you create the sheets (cross section or plan) but you can always remove the annotation from the cross section design model and reapply once the edit is complete.

Children
No Data