https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/208855/inroads-ss10---surface-creation---void-drape-removes-surfaceI am trying do a parking lot surface. As a preliminary am putting Islands into void. There are Two Islands in the surface. When i add them tosurface as Void drape features, they take off the entire surface. I am using Inroads SS10. I am creating surfaceen-USTelligent Community 12https://communities.bentley.com/thread/630949?ContentTypeID=1Tue, 26 Jan 2021 04:48:14 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:2de02c5c-6c14-4a58-b6e4-d488d9cf5f55Chris Key<p>Is your boundary a Drape Boundary?&nbsp; I found an old defect logged against SS4 (likely carried forward to SS10) which was an issue with adding drape voids if you have a drape boundary defined for the terrain.&nbsp; If you try to add a regular void, it works ok but you lose the ability for it to pick up the elevations of a terrain by draping it.</p> <p>Defect 349882</p><div style="clear:both;"></div>