https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/209497/geopak-earthwork-errors-xs-nopropI have about 50 cross sections. on each cross section I have drawn a line where the bottom of the proposed features are. Each cross section has the same type of line, level, weight, color, etc. On 23 of the 50, I am getting the error, &quot;XS-NOPROP&quot; no proposeden-USTelligent Community 12https://communities.bentley.com/thread/633370?ContentTypeID=1Tue, 09 Feb 2021 13:35:54 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:d8d00176-ab94-479a-b461-49053c6e3811MaryB<p>I&#39;ve seen stranger things.</p> <p>Something to consider next time might be to delete the Geopak resource files:&nbsp;<a href="/products/road___site_design/w/road_and_site_design__wiki/15923/geopak-resource-files-how-to-remove-them-and-why">https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/15923/geopak-resource-files-how-to-remove-them-and-why</a></p> <p>From time to time, those get bad bits of data.</p> <p>Another thing which can cause no end of frustration are cross section elements with negative coordinates - anywhere to the left or below 0,0. While that&#39;s probably not what was going on here (unless section 23 was created in a separate run) it can happen if cross sections are created too close to the origin. I usually create my cross sections with a DP over around 1000,1000 just to make sure that absolutely nothing ends up with a negative coordinate.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/633272?ContentTypeID=1Tue, 09 Feb 2021 01:52:12 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:a0181fca-53db-4345-b5bb-2b8c07c091f2Brandon Ratermann<p>I don&#39;t know why, but i copied the cross sections into a different drawing and it fixed the problem.&nbsp;</p><div style="clear:both;"></div>