I have about 50 cross sections. on each cross section I have drawn a line where the bottom of the proposed features are. Each cross section has the same type of line, level, weight, color, etc. On 23 of the 50, I am getting the error, "XS-NOPROP" no proposed xs elements at this station. when in fact every cross section has the same proposed line. i have tried exploding the line and tried changing the vertical search criteria with no luck.
Thanks,
Brandon
I've seen stranger things.
Something to consider next time might be to delete the Geopak resource files: https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/15923/geopak-resource-files-how-to-remove-them-and-why
From time to time, those get bad bits of data.
Another thing which can cause no end of frustration are cross section elements with negative coordinates - anywhere to the left or below 0,0. While that's probably not what was going on here (unless section 23 was created in a separate run) it can happen if cross sections are created too close to the origin. I usually create my cross sections with a DP over around 1000,1000 just to make sure that absolutely nothing ends up with a negative coordinate.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
I don't know why, but i copied the cross sections into a different drawing and it fixed the problem.