Roundabout creation in ORD using Stockdale method

RE: Roundabout creation in ORD using Stockdale method

Chris Congleton — Tue, 09 Mar 2021 15:32:37 GMT

I'll give that a shot. Thanks Mark!

Chris

RE: Roundabout creation in ORD using Stockdale method

Mark Marnell — Tue, 09 Mar 2021 15:20:41 GMT

Chris - do an internet search on "stockdale method roundabout design pdf" and (for me) the first result explains the theory - from original article too. It is basically a way to tie the vertical profiles together.

RE: Roundabout creation in ORD using Stockdale method

Chris Congleton — Tue, 09 Mar 2021 15:08:28 GMT

The link( (1) SIG Workshop – OpenRoads for the UK: Roundabout Design - OpenRoads | OpenSite Announcements Forum - OpenRoads | OpenSite - Bentley Communities) took me to the webinar registration page, for which the webinar had already taken place on January 28^th. I clicked on “Register Now” and then details and was asked for a passcode. I then clicked on the link to request a password and asked to enter my email. When I entered my email this is the box I get:

I did not register for this webinar, but I was hoping to see a recording of the webinar to get info on the “Stockdale Method” of modeling a roundabout.

I also, clicked on the secondary link( http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki) for which I was able to find a video on civil cells regarding roundabouts. I was simply hoping to see what this “Stockdale Method” was discussing.

Is there a recording of the webinar out there somewhere?

Thanks and best regards,

Chris Congleton

Division of Highway Design

200 Mero Street

Frankfort, KY 40622

Ph: 502-782-4874

RE: Roundabout creation in ORD using Stockdale method

Chris Congleton — Tue, 09 Mar 2021 13:57:43 GMT

Hi Marc,

I'm a design engineer for Kentucky Transportation Cabinet. Would you know if or how I could gain access to the webinar/info for the webinar you mentioned above?

Thanks,

Chris

RE: Roundabout creation in ORD using Stockdale method

Nikhitha Zacharia — Sat, 20 Feb 2021 05:48:22 GMT

thank you Marc

RE: Roundabout creation in ORD using Stockdale method

Marc Blancher — Fri, 12 Feb 2021 09:02:42 GMT

Hi Nikhitha, I believe you watched the UK SIG on roundabouts design using the Stockdale method delivered the 28th January. The method is the same for a 3 legged roundabout than for a 4 legged one.

The webinar is available here:

(1) SIG Workshop – OpenRoads for the UK: Roundabout Design - OpenRoads | OpenSite Announcements Forum - OpenRoads | OpenSite - Bentley Communities