https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/210908/corridor-not-processing-correctly-after-alignment-changeI am using Openroads Update 9 and have updated an alignment, but the corridor has not processed correctly. The alignment is in a seperate reference file and was updated using a complex redefine of the plan geometry. The profile was then adjusted toen-USTelligent Community 12https://communities.bentley.com/thread/638770?ContentTypeID=1Fri, 12 Mar 2021 07:50:52 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:c6f6f1e3-9d6b-4721-b57a-1d1e8aa25e40Joshua Close<p>Thanks Marcus - I had to use this technique to remove some of them. For some reason a version of the whole corridor&#39;s 3D elements had become orphaned. Do you know what can cause this?</p><div style="clear:both;"></div>https://communities.bentley.com/thread/638684?ContentTypeID=1Thu, 11 Mar 2021 20:14:22 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:15c6acfa-3ac8-4111-bb62-89fccca9d402Marcus Blake<p>I&#39;m not sure of the cause, but if there are phantom &quot;ghost&quot; elements retained in the dgn you might try deleting them via the process outlined in the wiki below.</p> <p><a href="/products/road___site_design/w/road_and_site_design__wiki/47809/how-to-delete-corrupt-ghost-phantom-elements-from-a-dgn-file-in-openroads-designer">https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/47809/how-to-delete-corrupt-ghost-phantom-elements-from-a-dgn-file-in-openroads-designer</a></p><div style="clear:both;"></div>