Couldn't edit Horizontal Alignment in ORD

RE: Couldn't edit Horizontal Alignment in ORD

Mark Marnell — Tue, 23 Mar 2021 07:35:40 GMT

Excellent - if you could close the thread by selecting 'More > Verify Answer' that would be helpful.

RE: Couldn't edit Horizontal Alignment in ORD

chandru — Tue, 23 Mar 2021 01:22:53 GMT

Dear Mark,

Got it thanks.

RE: Couldn't edit Horizontal Alignment in ORD

Mark Marnell — Mon, 15 Mar 2021 11:55:30 GMT

Top image show the original highlighted, the middle shows the alternative highlighted. Note the red arrows - I have added an arc with transitions at the left, and done a reverse curve to tie in on the right (red arrows) so that the second actually ties in. The bottom image is the result of using 'Complex Redefine' - I selected the first alignment, and swapped in the second one.

RE: Couldn't edit Horizontal Alignment in ORD

chandru — Mon, 15 Mar 2021 10:05:57 GMT

Dear Mark,

I have enclosed the alternative path to append with the previous alignment. I would appreciate if you could show me on how to edit the alignment to connect to the alternative route.communities.bentley.com/.../ALEC_5F00_ST_2D00_GITT-_2D00_-Copy.dgn

RE: Couldn't edit Horizontal Alignment in ORD

Mark Marnell — Fri, 12 Mar 2021 09:31:43 GMT

In what way are you unable to edit it further? Are you seeing any manipulators? If not, have you disabled the element handles in the 'Element Selector' dialog?

RE: Couldn't edit Horizontal Alignment in ORD

chandru — Fri, 12 Mar 2021 09:23:10 GMT

Dear Mark,

Thanks for your prompt response. I would like to reroute the alignment. However, I was unable to edit the alignment further. Appreciate it if you could help me out on this issue. I'm using the latest ORD edition 2020 release 3 (10.09.00.91)

RE: Couldn't edit Horizontal Alignment in ORD

Mark Marnell — Thu, 11 Mar 2021 09:52:10 GMT

Please give more detail - what are you trying to edit? Moving a point? Changing a radius? Are you expecting us to try every possibility to find what the issue you are facing is?