I recently upgraded to MicroStation Select Series 10 from Select Series 4. What do I need to do to have GEOPAK work with Select Series 10? This is what I had previously to open MicroStation with GEOPAK:
"C:\Program Files (x86)\Bentley\MicroStation V8i (SELECTseries)\MicroStation\ustation.exe" -wrP:\Standards\CAD\V8i\Workspace -wsLoad_GEOPAK_SS3=1
I changed SS3 to SS10 but I don't get the "Applications" menu.
I appreciate any help. Thank you.
Ray
Try changing it back to SS3. I think that's an actual variable in your workspace, and not related to the actual program. If that doesn't work, we may dig deeper.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Thank you for your help, Mary! Originally it was SS3 and it didn’t work. It came up with a Microsoft .NET Framework error.
Any further suggestions would be appreciated.
Set the SS3 to SS4. You can go to the GEOPAK startup icon that is created when you install the product. Go to the properties and you can see what is default in the command line.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Thank you, Holly. I set it to SS4 and it opens up MicroStation, but it does not have the "Applications" menu.
I recommend going to the GEOPAK executable and launching it there to see if GEOPAK loads. The default location for this is here: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Bentley. If you are still not seeing the application menu from this executable, then it could be that GEOPAK did not install properly. You also need to make sure you have MicroStation SS10 to be able to launch GEOPAK SS10