Openroad-Guardrail not showing in 3D View & Dynamic Section

RE: Openroad-Guardrail not showing in 3D View & Dynamic Section

Marcus Blake — Fri, 19 Mar 2021 15:40:32 GMT

In order for the features to be shown in XS and 3D it must have an active profile. Please ensure this is done.

https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20029/feature-not-displayed-in-3d-model

RE: Openroad-Guardrail not showing in 3D View & Dynamic Section

Mark Plum — Thu, 18 Mar 2021 21:39:14 GMT

I am making the assumption that you think that the 3D linestyle- being a combination of "solids"- should show up as a 3D cut whenever the linestyle is cut by a section. OpenRoads does not "see" these linestyles in this manner. In order for you to see the "guardrail", a cell needs to be assigned to the annotation group for the cross sections and needs to be assigned to the dynamic cross section feature referenced. In practice, one would not desire to see the actual linestyle cut, as at different cuts you would see a post, and others just the beam. With a cell defined, one will see the same object no matter where the section is cut.

Mark

RE: Openroad-Guardrail not showing in 3D View & Dynamic Section

James Anding — Thu, 18 Mar 2021 14:25:26 GMT

Check the Element Template and Feature Definition to make sure there isn't any pathing issue. Also make sure you have the correct Cell Library available as well.