Dear All,
i have created Guardrail (with features Guardrail_V2_Single_Sided_L) in Plan but in 3D view & Dynamic Section it is not showing, why?
Check the Element Template and Feature Definition to make sure there isn't any pathing issue. Also make sure you have the correct Cell Library available as well.
Consultant, Civil Engineering Success Services
I am making the assumption that you think that the 3D linestyle- being a combination of "solids"- should show up as a 3D cut whenever the linestyle is cut by a section. OpenRoads does not "see" these linestyles in this manner. In order for you to see the "guardrail", a cell needs to be assigned to the annotation group for the cross sections and needs to be assigned to the dynamic cross section feature referenced. In practice, one would not desire to see the actual linestyle cut, as at different cuts you would see a post, and others just the beam. With a cell defined, one will see the same object no matter where the section is cut.
Mark
In order for the features to be shown in XS and 3D it must have an active profile. Please ensure this is done.
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/20029/feature-not-displayed-in-3d-model
For more information about the Road and Site design tools, visit the Road and Site design WIKI at:
http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Answer Verified By: Kbb9327