https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/211445/corridor-template--edge-of-pavement-eop-template-pointWithin a ORD Corridor Template, can a EOP Point target a Feature Definition, Horizontal &amp; Vertical as a Priority #1 and if that line is not found, can that same template point target a Active Terrain (I have an FG Surface that I am reconstructing) asen-USTelligent Community 12https://communities.bentley.com/thread/640397?ContentTypeID=1Mon, 22 Mar 2021 10:02:28 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:c70d4ea1-0292-4847-a02a-f390e1dbe42eMark Marnell<p>Use a Point Control with Mode set to &#39;Both&#39; would be my suggestion.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/640394?ContentTypeID=1Mon, 22 Mar 2021 09:56:17 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:0da58197-0e72-473f-8c22-b94aa75211ffMatt Bombace<p>Mark- you are correct. I described it incorrectly. I had it confused with something that the end condition points can do.&nbsp;</p> <p><span style="font-family:inherit;">The EOP point in my template is actually a component point. Is there a way to mimic that &ldquo;Target Feature Definition- Horizontal &amp; Vertical&rdquo; that a end condition can do, within a component pint?</span></p><div style="clear:both;"></div>https://communities.bentley.com/thread/640385?ContentTypeID=1Mon, 22 Mar 2021 09:46:17 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:1898ce76-61ad-467f-a73c-c1805666603fMark Marnell<p>The way you describe it, the EOP is acting as an End Condition, so why not amend the template to make it the End Condition?</p><div style="clear:both;"></div>