Hey guys, I have a corridor with several curves and when calculating the superelevation in OpenRoads, it never seems to get things exactly how they should. This is fine, as I can simply unlock the section and use the table editor to manually adjust the superelevation points according to my own calculations. However, after spending this time manually editing my superelevation sections, I've realized I need to make a small change to the horizontal alignment which will result in slightly different stationing for my curves. Now since my superelevations are unruled, they will not update automatically when my alignment changes. This is unfortunate, but I figured I could still go back in and make these edits manually. But it seems I cannot adjust the start and end points of the superelevation sections? Is my only option really to recreate all of the superelevation sections and lanes then have to go through all the trouble of cleaning everything up again? Is there an easier way? I'm already losing a considerable amount of productivity adjusting to this software. Any help is appreciated.