Using two centerlines w/ feature definitions and active profiles, the Profile Intersection Point tool does not generate the point in the profile view.
I'm in a Corridor dgn w/ the geometry referenced in. I also used the Plan by 3D on the centerlines because I was getting a popup that the elements were in a reference that was not active. I haven't had to do that before.
I'm running 10.9.
Any ideas? Thanks
I still have the same issue using the tool in a Corridor dgn with the geometry referenced. The tool works fine in the geometry file with active alignments.
When trying it in the Corridor dgn, I see a cursor popup that the element (the alignment) is in a read-only reference. Could that be preventing the selection? I have "locate" enabled in the reference dialog. Is there a setting that would allow the selection?
I want to maintain the file separation as-is.
Thanks
I misunderstood the issue. That read-only message could prevent the tool from selecting properly.
Could you send me your dataset so that I can test and look at this issue?
You can upload to this link: https://bentley.sharefile.com/r-r7cc373e735ad4118809baed796a3194b