Profile Intersection Point not showing up

RE: Profile Intersection Point not showing up

Ja'Shon Arrington — Fri, 02 Jul 2021 20:08:05 GMT

I tested your files and was able to use the tool properly. I was able to select the geometry alignment using the tool by:

Selecting the Corridor centerline alignment first, then selecting the intersecting alignment.

RE: Profile Intersection Point not showing up

Ja'Shon Arrington — Thu, 01 Jul 2021 12:45:04 GMT

I misunderstood the issue. That read-only message could prevent the tool from selecting properly.

Could you send me your dataset so that I can test and look at this issue?

You can upload to this link: https://bentley.sharefile.com/r-r7cc373e735ad4118809baed796a3194b

RE: Profile Intersection Point not showing up

Spencer Beale — Thu, 01 Jul 2021 01:10:40 GMT

I still have the same issue using the tool in a Corridor dgn with the geometry referenced. The tool works fine in the geometry file with active alignments.

When trying it in the Corridor dgn, I see a cursor popup that the element (the alignment) is in a read-only reference. Could that be preventing the selection? I have "locate" enabled in the reference dialog. Is there a setting that would allow the selection?

I want to maintain the file separation as-is.

Thanks

RE: Profile Intersection Point not showing up

MaryB — Wed, 30 Jun 2021 22:18:11 GMT

Why would we merge the geometry reference into the corridor? Best Practices (coming directly from Bentley) is to keep geometry in its own separate file (preferably separate files for each alignment).

RE: Profile Intersection Point not showing up

Ja'Shon Arrington — Wed, 30 Jun 2021 21:25:46 GMT

Hi Spencer,

Are you still having issues?

Have you tried merging the reference to master?

If not, then try that and see if that fixes the issue.