Hi all,
Does anyone know how to cycle to another element underneath another when trying to use it as a Reference element with Civil Accudraw. Tab doesnt do anything and right-click resets. Just like selection cycling of multiple elements on top of each other with the popup menu - this looks to be broken in ORD but worked fine in SS4.
Regards,
Mark
Funny enough, if click the activate "normal" Accudraw icon Tab it works as normal - is this happening to anyone else?
OpenRoads Designer 2022 R3 (10.12) | Microstation 2023 | ProjectWise CE 3.4
Mark, I've seen different times where selecting what I want has been difficult, but haven't spent much time to identify the consistencies between them, but it feels like it is probably this behavior. I have had luck at different points cycling through elements with a tentative snap, not sure if that will work in Civil Accudraw, but it might be worth a try.
Steve
www.envisioncad.com
ORD - 10.12.02.04 / 10.10.21.04 / 10.10.01.03 / 10.08.01.33Power GEOPAK / Power InRoads - 08.11.09.918Civil 3D - 2021 / 2022