Centerline vertical geometry not displaying in 3D

Question

I'm using Power Geopak V8i SS10. Very new user. 
 I have my centerline horizontal and vertical created and both have been exported to the gpk. My geometry file is referenced into my model file. When in my model dwg, if I switch to 3D space, the centerline does not show up. Also when selecting my centerline, it does not give me the option to open profile view. Any ideas? 
 All help is appreciated, thank you!

Steven Litzau · Accepted Answer

(I replied here once, but then had a note that I was "offline", so if this duplicates, my apologies.) 
 The vertical content that will show in the 3D model is going to be the active profile. Until a profile has been set active, there won't be anything in the 3D model. The opposite isn't always true, in that (depending on which product in the evolution of the tools you are using) clearing an active profile does not always remove the element from the 3D model. 
 If the profile has been set active, and you still don't see it, I would start to check levels and the Feature Definition to make sure something is defined for the 3D representation. 
 Steve

Centerline vertical geometry not displaying in 3D

Top Replies