https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/214490/ord---combining-alignments-profilesI am using ORD 2020 V 2 (10.08.01.33) and have a series of alignments with profiles that I need to combine into one alignment/profile. Is there an automated way to do this, or do I need to create one complete alignment, project the current profiles anden-USTelligent Community 12https://communities.bentley.com/thread/652422?ContentTypeID=1Fri, 28 May 2021 10:43:28 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:4d911449-32d7-4f7a-a30f-e5f38fdb1da9T T<p>Just like Matthew Eiben said, you should try the Complex by Elements tool to chain the individual alignments together.&nbsp; Then you would open the profile window of the newly complexed alignment and chain all the individual profiles together.&nbsp; Tedious process...</p><div style="clear:both;"></div>https://communities.bentley.com/thread/652241?ContentTypeID=1Thu, 27 May 2021 16:59:29 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:8f4e4756-7610-4c66-be13-fc5e9fc25ad4Matthew Eiben<p>Have you tried the Complex by Elements and Profile Complex by Elements commands?&nbsp; Complex the horizontal together then complex the profile elements together. I think that should do what your looking for.&nbsp;&nbsp;</p><div style="clear:both;"></div>https://communities.bentley.com/thread/652235?ContentTypeID=1Thu, 27 May 2021 16:33:43 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:29e5401b-6f24-44fc-af92-f98b16a4e56aeddiegiese<p>Not 100% sure this would work, but you could try exporting all to a GPK and then re-importing into ORD. When re-importing, just select the one alignment you want to use and all the profiles you want to be associated with that alignment. You&#39;ll need to make sure they share the stationing or you can run into issues when importing. You&#39;ll also only be able to set one Active Profile at a time.&nbsp;</p><div style="clear:both;"></div>