Hi
I'm using Power Geopak V8i SS10. Very new user.
I am working on modeling an intersection. I have laid out a pavement/wearing surface with edge of pavement lines. I applied my curb & gutter/sidewalk/tie as a linear template to EOP lines. When adjusting the vertical geometry of the eop line, the template does not update to corresponding vertical. Is a linear template not dynamic or tied to this line? Or is it and I need to rebuild the "corridor" somehow?
As always thank you for your help!
Okay - I did notice when I adjust the centerline/crest of the road it updates, which was added as a breakline. When I move the edge of pavement ( which was added as the boundary) it does not update. Do I need to add the boundary lines as breaklines too?
Any insight on the linear template not updating automatically? It does update if I go to the project manager, civil objects, process corridor. Do I have to do this for every linear template?
It should update when you make an adjustment.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki