ORCS transition template

Question

Hi , 
 how can I create transition between road/rail and wall to continue from wall to fill , here is picture from very old video ORCS presentation and I have no idea hoe to make it 
 karol

PEvans · Answer

Changing your template transition length between the wall template and the fill template to zero will resolve most of your problem. You will then need to address how the slopes at the beginning/end of your wall tie to the existing ground if the proposed elevation delta where you change from fill slope to wall is anything other than zero. You could build that transition into your wall template, add another component to base the transition from or just ignore the transition and have them resolve it in the field. HTH