Is there a number of max codes per survey point. I can get two lines to start at a certain point, but if I add another code, it only uses the first two.
Thanks
Open Roads only permits one alpha or numeric code per survey point stored.
If you dual code (or more) it creates points with sequence numbers - 801, 801_1, 801_2, etc.
The link codes are even trickier. Some allow one code per shot, others allow more than one. Once used in a survey, they are split into two groups - link vs control. I forget which is which, but the codes to start and modify figures - Start, StartPC, PC, PT, NonTangentPC, NonTangentPT, etc are the one per shot per alpha code. The ones like JoinPoint, Rectangle, Distance can be used with more than one per point. You can also tell the one code per point codes as they permit numeric coding. The more than one codes do not.
This may read clear as mud, but I am not on a PC with the software loaded, so I have no reference other than memory.
Charles (Chuck) Rheault CADD Manager
MDOT State Highway Administration Maryland DOT - State Highway Administration User Communities Page
I've been able to get the fbk to work, but not the csv, because of not being able to format the tiw correctly.
IDOT.csv
JOB "IDOT" UNITS USFOOT DMS ANGLES RIGHT ZENITH ATMOS ON CR ON PRISM CONSTANT 0 PRISM OFFSET 0 EDM OFFSET 0 Converted from v2020.10.4 to v2021.10.24 NEZ "PRS641654184649" 1133718.203 2452954.307 611.937 "" Deleted 08:35:38 AM 29/7/2021 NEZ 1 1123589.216 2422568.803 613.658 "6681 B 6682 B 6683 B" NEZ 2 1123569.164 2422583.705 613.646 "6681 E" NEZ 3 1123585.889 2422606.135 613.251 "6682 E" Deleted 09:07:40 AM 29/7/2021 NEZ 5 1123605.969 2422591.232 613.217 "6683 E" Exported file: /storage/emulated/0/Trimble Data/Projects/test/IDOT.csv
A little off topic....have you noticed if the NEZ point values are being stored in International Feet? This was an issue in past versions.
Thanks,
Cliff
Not sure how to check that in OpenRoads. My collector is set up for survey feet so even if I've chosen no coordinate system it is what it is?
Here is a thread about the issue....Hope it's fixed in ORD.
https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/147815/fbk-format---import-issue/450219#450219