I am currently using Microstaion v8i, select series 10. I have created a 3D model and im trying to get the ROW line to show. I have previously used horizontal geometry lines and created a complex element with the feature for Existing ROW lines to make it show, once set active under a terrian model. When I go to create 3D cross sections, in the cross section viewer I can see the Existing ROW lines and my template & existing ground but when I cut the cross sections it will not show on the sheet just the templates/existing ground I created. Not sure what the problem could be, im thinking maybe something needs to sinc that im not doing , any advice would help. Thanks in advance
From the terms you have mentioned like "cross section viewer", "horizontal geometry lines" etc. it appears, like what Bob Rayner suggested, that you might be using a Civil product, like OpenRoads or InRoads. Would you be able to clarify exactly which software / version is being used.
RegardsAndrew BellTechnical SupportBentley Systems
Its Open Roads concept , do you know of any pdf or sited to show the flow pattern of X-Sections ? I was thinking maybe i did something wrong or may need a new setup