I am currently using Microstaion v8i, select series 10. I have created a 3D model and im trying to get the ROW line to show. I have previously used horizontal geometry lines and created a complex element with the feature for Existing ROW lines to make it show, once set active under a terrian model. When I go to create 3D cross sections, in the cross section viewer I can see the Existing ROW lines and my template & existing ground but when I cut the cross sections it will not show on the sheet just the templates/existing ground I created. Not sure what the problem could be, im thinking maybe something needs to sinc that im not doing , any advice would help. Thanks in advance
Could be the Z value of those elements are not near the real elevations. Assume you're using an application software like Open Road, can't help with that.
Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley
Yes thats true. When I created a new ROW line closer to the template , the existing ground was constant but still it would show in my X-sections production. Im assuming the survey should of been maybe a foot or more past the ROW line to get the Z-elevation