Hi Everyone,
I was hoping to understand how to break/insert gap/split 3D Linear Element Strings? See the attached
I'm trying to create a terrain from an imported mx genio file, however before I create this I need to remove the strings from the overpass above.
For some reason the standard Drawing-Modify Tools do not work. It appears that you can only break strings that have been created in ORD...
Any help would be greatly appreciated.
Thanks,
Glen
Hi everyone,
Bentley have provided a work around, see the attached image. Its a fair bit of work, but it does work.
This issue has been logged. Defect 1135302:Not able to manipulate/break/drop 3D linear elements
Cheers,
Answer Verified By: Glen Hughey
Thanks Robert, the issue with this is you will lose all your feature definitions once you export. Thanks for the suggestion though, I appreciate your help.
Whenever faced with a situation where it appears that some imprint of civil data is preventing me from manipulation of an element that I want to turn into a basic 3D Linestring, I place a fence around the project area and use the FENCE FILE command (Keyin "ff=") to kick the data out into v8i friendly data that is usually more manageable to work with.