Cross section model not displaying in annotation window

RE: Cross section model not displaying in annotation window

Taylor Day — Wed, 18 Aug 2021 14:34:28 GMT

AVOID USING BRACKETS in the cross section model name. They will cause the Geopak to glitch

"( ) "

RE: Cross section model not displaying in annotation window

Taylor Day — Thu, 12 Aug 2021 12:52:03 GMT

Hey,

it is Power GEOPAK V8i

RE: Cross section model not displaying in annotation window

Taylor Day — Wed, 11 Aug 2021 19:12:38 GMT

It is in positive coordinate system. Thanks for pointing that out, that will be another check I'll do when creating Cross sections.

RE: Cross section model not displaying in annotation window

MaryB — Wed, 11 Aug 2021 14:25:39 GMT

At this point it shouldn't be an issue but...Are all of your cross sections and cross section cells in positive coordinates ("up & right" of 0,0)?

I have seen strange behavior when any of my section work drifted into negative coordinates.

RE: Cross section model not displaying in annotation window

Taylor Day — Wed, 11 Aug 2021 13:04:00 GMT

I cut this cross sections. The cell is active in the the dgn. I tried coping in a cell that works in a different model and than using the navigator but it gave me the same error message.

RE: Cross section model not displaying in annotation window

Shawn Cooke — Wed, 11 Aug 2021 12:07:22 GMT

Are your geopak cells referenced or active in the dgn you're working in? If they are not active, try activating that reference temporarily, then running the navigator.... or copying in a copy of the cells. Otherwise, were the cells you're using created by you or someone else?

RE: Cross section model not displaying in annotation window

Kiran Kumar DP — Wed, 11 Aug 2021 09:37:14 GMT

Hello Taylor,

May I know which product and its version you're facing this issue with?