have been trying to label the back slope and side slopes but it has not been labeling it well it has been mixing sometimes 1:3 and sometimes 1:4 while all my slopes are set to 1:2..tried several times it failed.anyone who has a metric template and a civil xin that has those settings for me to use..please help
I doubt that another XIN file will resolve your issue. The annotation is a result of the math. I suspect the problem is in your DTM, or at least in the way you cut your cross sections. You might try enabling 'Use Features Only' on your proposed DTM then update and re-annotate your cross sections. This will ignore long triangles along the edge of your DTM that might be flattening your slopes. HTH
What software are you using, and what version (specific version number) of the software are you using?
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2