I noted the ability to removed persistent snaps in Geometry tools.
communities.bentley.com/.../persist-snaps-and-how-to-remove-snap-rule
Can these be removed for multiple items at once? I.e. A key in feature to remove persistent snaps everywhere.
For example, in my drainage model, I have persistent snaps remembering old Labels.
This trickles down and affects my FlexTable Output.
Would be helpful being able to remove the snaps all at once.
Not sure if this will be useful or not but there is a key-in "geometry snappersistence off" that may do what you want. We had an issue with Persistent Snaps enabling. I don't remember where I found this key-in but I added it to a macro that runs on startup and turns off the Persistent Snap. As far as I am aware it works across the board.
Microstation CONNECT 10.17.00.209
ORD CONNECT 2021 R1 10.10.1.3
Microstation v8i SS 10 08.11.09.919
Power InRoads v8i 08.11.09.615
ProjectWise 10.0.3.453
Answer Verified By: Tsholofelo Oageng