https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/220772/openroads-designer-cross-section-side-slope-labelsI am trying to get our cross section side slopes to annotate properly and I&#39;m not having any luck at all. Referring to the images below, the side slope label is labeling between the top of slope point and fill point and not to the intermediate hinge pointen-USTelligent Community 12https://communities.bentley.com/thread/702303?ContentTypeID=1Mon, 21 Mar 2022 14:27:15 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:f863a10f-2ef2-4018-ada8-da9d0ac97b68Steven Litzau<p>Just to offer an additional experience, adding Feature Definitions to a couple points that had been missing them remedied some stubborn annotation issues I was experiencing with a client. Erika, thanks for sharing the tip.</p> <p>Steve</p><div style="clear:both;"></div>https://communities.bentley.com/thread/702048?ContentTypeID=1Fri, 18 Mar 2022 19:45:46 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:3ec8e765-ba9b-4929-9988-13958889ef29Erika Smith<p>I had something similar, make sure your points have feature definitions. This helped my case out. Hopefully helps yours. Good luck.</p><div style="clear:both;"></div>