Hello,
I am following the video tutorials on Bentley's site but I have faced a problem. I created a superelevation file and attached it to the prepared geometry file. And I assigned superelevation to the corridor.
But on the rising side of the pavement, shoulders don't follow the rotation as in the following pictures.
Superelevation flag boxes along the pavement on the template are checked as in the following picture:
soo....what may be the problem?
You need to create additional superelevation lanes which encompass the EOS points. Or, if your shoulders and lanes have the same normal cross-slope, you can constrain the shoulder points using a vector-offset = 0 between the CL and EOP points instead of the slope constraint.
Answer Verified By: Engineer Yok
Thank you it solved my problem. I also figured a solution with rollover point adjustment. i changed properties as follows: