Is there a way to copy a number of items of ruled geometry all at once? I know that the copy geometry tool works on individual elements, but I need to create a large number of these indicative access' to run swept path analysis on them. Each one will be slightly different so I want to be able to adjust offsets and angles all at once. Is there a way to do this?
That is actually a great shout Steven! I ended up doing it in separate files for now, but will bear this in mind for the future.
Seems like this might be a good appliction for a Civil Cell. I've never tried to create one with out vertical geometry, but I would think you should be able to.
www.envisioncad.com
ORD - 10.12.02.04 / 10.10.21.04 / 10.10.01.03 / 10.08.01.33Power GEOPAK / Power InRoads - 08.11.09.918Civil 3D - 2021 / 2022
Answer Verified By: Joshua Close
First copy the "original one"/ basic design element, once this step is done you can move foward and copy the associated element to original one. There is no way you can do it all at once, but this way you can copy parts of your design. Or copy the whole file.
I feared as much. I could do that, but was hoping to show (and edit) them all the in the same file.
No way to copy a bunch at once. Why not just copy the whole file?