OpenRoads Designer Connect Edition 10.10.01.03 Default Level

RE: OpenRoads Designer Connect Edition 10.10.01.03 Default Level

Araceli Cortes — Fri, 12 Nov 2021 20:42:42 GMT

What happened was that my WorkSpaceSetup.cfg was not pointing to the correct location/folder. DOT gave me instructions on how to fix it. Thank you.

RE: OpenRoads Designer Connect Edition 10.10.01.03 Default Level

Joe Muni — Wed, 10 Nov 2021 16:30:39 GMT

I'm wondering if you are using the correct version of OpenRoads for the Workspace that you are using. Not all workspaces work on all versions of ORD. It's possible that the DOT workspace is set up to be used on an earlier version than the 10.10 version that you are using.

You might want to check with them regarding that.

RE: OpenRoads Designer Connect Edition 10.10.01.03 Default Level

MaryB — Tue, 09 Nov 2021 18:38:37 GMT

The thing I takeaway is that the DGNLIB used for the feature definitions also needs to contain the levels for those feature definitions. That is to say, that feature definitions, elements templates and levels all need to be defined in a single DGNLIB file. If you have part of that defined in one DGNLIB file and the rest of it in another, things will not work properly. That is certainly something you can check.

It may not be your problem, and if you are using networked standards, you may not be the one to fix it, but you can certainly investigate where your definitions are stored.

RE: OpenRoads Designer Connect Edition 10.10.01.03 Default Level

Araceli Cortes — Tue, 09 Nov 2021 14:30:05 GMT

Thank you,

I have read through that forum so many times, but it is still not quite clear what I'm supposed to do on my end.

RE: OpenRoads Designer Connect Edition 10.10.01.03 Default Level

MaryB — Thu, 28 Oct 2021 19:17:37 GMT

This may not be it, but you can check: https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/186538/levels-are-set-as-default-in-templates-in-one-file/547322#547322